Touch Board Starter Kit:
Get Started

Welcome to the Touch Board

The Touch Board is a unique microcontroller and in this tutorial we're going to show you how to get started with the Touch Board. Right out of the box you can get started with the Touch Board, in just three easy steps!

1. Add speakers or headphones

Plug your speaker (or headphones) into the audio jack on the top left-hand corner of your board.

2. Provide power

In order to power the Touch Board, plug your micro USB cable into the Touch Board. You can power it directly from your computer or a USB power source. Ensure the on/off switch at the bottom left-hand corner of your Touch Board is switched to ON. You should see the green LED next to the on/off switch come on. This means your Touch Board is live!

3. Touch the electrodes

Now, touch the electrode on the upper left-hand corner of your board. If everything is working, you should hear the first of twelve audio tracks that we pre-loaded to help you get started!

The electrodes are the twelve golden squares that run along the top edge of your Touch Board. They are numbered E0 to E11.

Listen to the audio guide to find out more about the Touch Board and its different features. Once you've explored the audio guide, you're ready to upload your own selection of sounds or change the code of the board!